Available Sizes :

• Width: From: 300mm up to 1250mm
• Length: From: 1250mm up to 2500
• Thickness: From: 0.3 up to 8mm and above

“Kriscop” Copper Tape available with us are highly heat resistant and light in terms of weight. These tapes find wide application as a coil form in switch terminals as well as in ion electric conductors.

These tapes are fabricated using quality Copper and are known by the name of Electrolytic grade Copper strips. These tapes are available in different specifications as demanded by clients in terms of thicknesses and other finish properties.

Features:

• Electrolytic High conductivity
• Soft Hardness
• ETP Grade finish.
• Available Sizes:
• Common size(mm): 25*3; 25*6; 50*3; 50*6
• Also Available: 1000mmx1000mmx1 ft.

Further, these can be made available as high conductivity annealed Copper tapes as per BS 1432-C101 as well as in form of flexible Copper Braids as per BS 4109 – C101 standards in tinned and Copper color.

Electrolytic Tough Pitch Copper (ETP) Quality being the ultimate concern, we bring forth thermostatically balanced and highly efficient collection of electrolytic tough pitch copper (ETP). Our collection C11000 electrolytic tough pitch, known as ETP copper or tough pitch copper, has long been the standard type of commercial wrought copper used in the production of sheet, plate, bar, rod, strip and wire. Copper 110 is widely used in different applications based on its conductivity, corrosion resistance, workability, and service life.

Applications:

• Electrical
• Telecommunications
• Architectural
• Antimicrobial

Available Grade:

• ASTM B124, ASTM B152, ASTM B187, ASTM B370, DIN 2.0060, BS 2870 C101, BS 2874 C101, BS 2875 C101, EN CW004A, C11000

Available Forms:

• Flats, Rods, Wires, Plates / Sheets, Foils, Strips, Profiles/ Sections & Billets For Forging And Extrusions

“KRISCOP” Copper Electrolytic Flat Bars are available in a wide range of finishes as per the specific end application demands. These Copper flats are fabricated using Copper purity of up to 99.9 % in compliance with defined industry standards including IS191 IS1897.

Further, our expertise also lies in delivering these with Copper or nickel coating in forged, hot rolled as well as in cold worked finish as per required dimensions. These can also be made available in soft, half-hard and hard conditions in different finishes. The surface treatment of Copper flat bar can be electro-plated with tin or silver.

Benefits:

• High Conductivity
• Dimensional Accuracy
• Longer service life
• Crack-free Bends

• Bus Bars
• Transformer Connectors
• Earthing Protection in L.T. and H.T. Electrical Panels
• Power Transmission equipment
• Control Panels

General Properties :

• Material with minimum Copper content of 99.9% as per IS 191

Available Grades :

• C101/C102 / C 103 / B170/B379

Size:

• Width 3 mm to 160 mm
• Thickness o.5 mm to 10 mm

• Squares, Hexagon, Octagon as well as in D, V, C, A and hollow shapes, rods, tubes, bus-bar. These are also available in form of Copper balls of high ETP grade with latest Copper extrusion technology.