Tellurium Copper C145 Tellurium is adapted for use in high-speed automatic screw machines. The copper telluride precipitations become finely dispersed throughout the matrix and assist in chip breakage into short pieces, thus enabling a much higher machining speed than with pure copper. Copper 145 Tellurium has a machinability rating scale of 85%, compared to pure copper of 20%, thus insuring longer tool life. The high conductivity of tellurium copper makes it a suitable material for electrical applications, and is an outstanding alloy for the production of hot forged products.

Applications: 

• Transistor Bases, Motor Parts, Electrical Connectors, Switch Parts, Welding Torch Tips, Soldering Tips, Screw Machine Products, Forgings , Plumbing Fittings, Sprinkler Heads, Fixtures, EDM Anodes, Tool Making Parts, Dies /Welding Torch tips / Transformer & Circuit-breaker terminals & Fasteners 

Available Grade:

• ASTM B301, C14500

Available Forms:

Rods

• Power Steering Tube, Brake Lines, Screw Lamp Bases Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators, Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses, Flanges

“KRISCOP” Copper Shapes Shims are available in a wide range of finishes as per the specific end application demands. These Copper flats are fabricated using Copper purity of up to 99.9 % in compliance with defined industry standards including IS191 & IS1897.

Further, our expertise also lie in delivering these with Copper or nickel coating in forged, hot rolled as well as in cold worked finish as per required dimensions. These can also be made available in soft, half-hard and hard conditions in different finishes. The surface treatment of Copper flat bar can be electro-plated with tin or silver.

Benefits:

• High Conductivity
• Dimensional Accuracy
• Longer service life
• Crack - free Bends

Leaded Berrylium Copper Rod is identical to a version of lead-containing alloy. IT achieves the same exceptional strength after hardening. THIS rods contain a small amount of lead to provide an alloy tailored for automatic machining operations and the Lead promotes formation of finely divided chips thus extending cutting tool life.

Applications:

• Contact Bridges, Electrical Switch and Relay Blades, Electric Motor Components, Navigational Instruments, Clips, Electrical Connectors, Connectors, Relay Parts, Switch Parts, Fuse Clips, Washers, Screws, Bolts, Retaining Rings, Roll Pins, Lock Washers, Fasteners, Shafts, Pump Parts, Valves, Non Sparking Safety Tools, Flexible Metal Hose, Bushings, Rolling Mill Parts, Electrochemical Springs, Pumps, Shafts, Springs, Bellows, Welding Equipment, Diaphragms, Bourdon Tubing.

Available Grade:

• C17300 (CDA 173), C19140, C19160, C79200, C79300., ASTM B196, QQ-C-530, ASTM B197, QQ-C-530 , ASTM B194, DIN 2.1248, CW102C to EN

Available Forms:

Rods, Ingots

The brass and copper Copper Brass Rolled Sheets is manufactured using quality. Our customers can avail from us these sheets in various standard and customized sizes and that too at best affordable price.

Features:

• Excellent durability
• Sturdy construction
• Efficient performance
• Heat resistance
• Long working life
• Unmatched performance

Nickel silver is a metal alloy of copper with nickel and often but not always zinc. It is named for its silvery appearance, but contains no elemental silver unless plated. Other common names for this alloy are: new silver German silver, paktong, and alpacca (or alpaca). It is noted for both corrosion resistance and high electrical resistance. Our aluminum strip can be produced in standard dimensions or custom made to your requirements. We produce both imperial and metric units.

KRISCOP provides a full range of nickel silver products for almost any application. Our strip, coil, foil, bar, rod, plate, sheet, and other profiles are produced in a wide variety of alloys, including clad composites. They can be produced in standard dimensions or custom made to your requirements. Our nickel silver products are manufactured in compliance with the main international specifications, and tighter tolerances are available upon request. We offer various platings and coatings, edge conditioning, special surface conditions, profiled strip, and multiple packaging options to meet our customers requirements. The following is a summary of our production capabilities.

Alloys:

Copper Chromium Zirconium Rod (Cucrzr)” Used extensively for cap style resistance welding electrodes. Evidence suggests that it can provide less sticking and resist deformation longer than its copper-chrome counterpart in some specific situations.

Applications: 

• Pencil-type & Light Soldering Guns: Tips, Rod Extensions, Resistance Welding Electrodes, Welding Electrodes, Welding Wheels, Tips and Rod Extensions. 

Available Grade:

• RWMA Class II

Available Forms:

Rods, Ingots & Billets For Extrusion/Forging

The “Kriscop” Beryllium Copper Rod (C101/C102/C103/B170/B379) are available in different finishes and designs as per the requirements of clients. These pure Oxygen Free Copper rods are developed from qualitative electrolytic Copper with the best possible finish standards.

Applications:

Electrical industry: Earthing Rods, Panel Electrification Lines and Making Anodes

General engineering: Forging Components

Available forms: Squares, rounds, hexagons, flats as well as in other custom shape choices.

• C101/C102/C103 B170/B379
• We also manufacture these type copper rod
• EC Grade Copper Rod
• ETP Grade Copper Rod C110/B5
• DHP Grade Copper Rod

Copper Nickel Ingots and Extruded Rods (90/10 - 70/30)” Also known as Cu-Ni, offers excellent corrosion resistance, especially in marine salt water environments. Copper nickel alloys that are generally chosen for sea water parts and service equipment contains 10 to 30 percent nickel. These various alloys also have important additions of iron and manganese, which are necessary to maintain good corrosion resistance in the harsh environments. Aside from being very corrosion resistant to sea water, copper nickel alloys are very thermally stable. Copper nickel is most commonly used in applications such as electrical and electronic products, tubes for condensers in ships and power plants, various marine products, including valves, pumps, fittings, and sheathing for ship hulls.

Available Grade:

• C70600 & C71500 / C75200/ ASTM B151, SAE J461, SAE J463

Available Forms:

• Rods, Ingots & Billets for Extrusion/Forging
• Copper Nickel Ingots / Extruded Rods (90/10 - 70/30)