Gilding Metal Copper (CUZN 90/10 - 95/5)” It is a rich golden colour with the best combination of strength, ductility and corrosion resistance of the plain copper-zinc alloys. It weathers to a rich bronze colour, and can be supplied in pre-patinated colours ranging from deep brown to green. It has a lower rate of work hardening than the copper-zinc alloys with higher zinc content, such as 260 and 272. This is an advantage in multistage pressing applications without interstage annealing. It has excellent deep drawing characteristics and resistance to pitting corrosion when exposed to severe weather and water environments.

Applications:

• Architectural fascias, grillwork, jewellery, ornamental trim, vitreous enamel base, badges, door handles, escutcheons, marine hardware, munitions, primer caps, rotating bands, metallic bellows, pen, pencil and lipstick tubes etc.

Available Grade:

• Alloy 220-UNS-C22000, CW501L / CZ101, C21000 (ASTM B36 )

Available Forms:

• Flats, Rods, Profiles/ Sections, Hex

The Brass Components are precision manufactured using pure brass in compliance with defined industry standards including ISS, BSS and DIN.

Applications:

• Architectural fittings
• Hardware
• Telecommunication
• Engineering industries
• Automobile industries
• Pressure vessels
• Heavy engineering fabrication

Cartridge Brass Bars (70/30) Cartridge Brass also known as yellow brass has a nominal composition of 70% copper and 30% zinc.It has excellent to good corrosion resistance in most environments, but is not suitable for use with certain materials, such as acetic acid, moist ammonia or ammonia compounds, hydrochloric acid and nitric acid. It is the most ductile of the brasses and has superior cold workability, good hot formability, and is used in greater quantity than any other brasses.

Salient features:

• Superb cold forming properties
• Excellent deep drawing characteristics
• Good corrosion resistance
• Optimum combination of strength and ductility for alpha brasses

• Grillwork
• Odometer Contacts
• Heater Cores
• Thermostats
• Electrical Connectors
• Radiator Cores
• Radiator Tube
• Tanks, Odometer Contacts

Available Grade:

• ASTM B36, DIN 2.0265, BS 2871 CZ106, BS 2875 CZ106, EN CW505L, c26000, c27000, c 27200, c27400, CW505L / CZ106

Available Forms:

Flats, Rods, Wires, Profiles/ Sections, Hex

Nordic Brass Flat Bars (85/15 - 80/20) RED BRASS is the most durable of all metals for commercial USAGE. Normally composed of 85% copper and 15% zinc, this alloy has excellent resistance against dezincification, season cracking and pitting. This has a rich inherent color, which has become extremely popular as an outdoor metal and has been found to be very important in modern architecture. IT IS also known as NORDIC Brass.

Applications:

• Etching Parts
• Weather Strip
• Sockets
• Screw Shells
• Conduit
• Rotor Bars
• AC Motors
• Fasteners
• Eyelets
• Heat Exchanger Shells
• Flexible Metal Hose
• Fire Extinguishers

Available Grade:

• ASTM B43, c23000, c 23400, c69400, c69430, c83600, c84400.

Available Forms:

Flats, Rods, Wires, Profiles/ Sections, Hex

“KRISCOP” Brass Hex Bar are appropriately used in low-strength assemblies where corrosion resistance is a primary threat. With drive system having a hexagon-shaped head, the fine threads allow better tapping into harder materials as well as in thin walls and ensure a lasting hold. We are a well known manufacturer of Brass Hex Bars and Rods.

These hex bars & rods are strong in tension in comparison to coarse threads that make these used in various industries.

Manufactured from best quality brass, the flawless finish quality of these hex rods also helps in rendering optimal level of satisfaction. Here, we also ensure that these brass hex bars are made available at most reasonable prices.

The “Kriscop ” Brass Edm Wires are precision manufactured using pure brass in compliance with defined industry standards including ISS, BSS and DIN.

Applications:

• Architectural fittings
• Hardware
• Telecommunication
• Engineering industries
• Automobile industries
• Pressure vessels
• Heavy engineering fabrication

Manufactured using cutting edge technology, these brass coated wires are available in high grade brass in diffused, heat treated and zinc coated finish. Some of the industry sectors and end areas where these are used in include engineering & automobile industries, pressure vessels, heavy engineering fabrication and others.

Brass Round Bars are ideally suited in applications requiring superior strength, corrosion resistance, non-sparking characteristics and electrical conductivity. The brass coated squares are easy to polish and ensure high luster. These squares are easily machined and are available in different industry specifications including ASTM B16, C360, C36000.

Applications:

• Fasteners
• Fittings
• Marine hardware instruments

Application Areas:

• Free Cutting Brass Rods
• Fasteners, gears, architectural extrusions
• Automotive engineering parts
• Pressing materials like knobs, hardware
• Bending, hot forging and other applications

High Tensile Brass Ingots (HTB1/HTB2/HTB3)consists of a duplex structure. Developed for more exacting applications where strength and corrosion resistance are required. Also referred to as a manganese bronze the CW721R / CZ114 has additions of aluminium, iron, tin and manganese that are added to the basic 60/40 brass matrix, creating a variety of properties to benefit the designer.

The aluminium and tin content gives the CW721R / CZ114 a brighter finish and is the main reason for the increase in corrosion resistance. The iron and manganese additions also improve the strength level, with the iron also acting a grain refiner. Some of the other benefits of the CW721R / CZ114 grade are a very good hot working capacity to allow for hot stamping and a good machinability rating.

• Enhanced Strength Levels, Excellent hot forming properties, Good Corrosion resistance
• High machinability rating, Non-sparking

• Gas valves, fittings, fasteners, pump trim, gears, locks, heavy-duty electrical connectors, transmission components, marine hardware, safety tools and decorative metalwork.

Available Grade:

• CZ115 / CW722R / CW721R / CZ114

Available Forms:

Ingots, Flats, Rods, Profiles/ Sections, Hex

Description: Red Brass is the most durable of all metals for commercial Usage. Normally composed of 85% copper and 15% zinc, this alloy has excellent resistance against dezincification, season cracking and pitting. This has a rich inherent color, which has become extremely popular as an outdoor metal and has been found to be very important in modern architecture. IT IS also known as NORDIC Brass.

Available Forms:

• Flats, Rods, Wires, Profiles/ Sections, Hex